Accessoires
Neumann M 150 tube
Description
- A unique tube microphone for first-class orchestral recordings.
- Reproduces the sound of the legendary Neumann M 50
- Titanium capsule with unique directional behavior
- Perfect for orchestral recordings
- Sphere
- DIN-8F
- nickel
The M 150 is a unique small-diaphragm condenser microphone for orchestral recordings based on the legendary Neumann M 50. The pressure receiver capsule of the M 150 is made of titanium and is embedded in a sphere, which provides directivity at high frequencies. An innovative transformerless tube circuit guarantees low self-noise.
Features:
- Ideal for DECCA Tree stereo and surround recordings
- Modern version of the legendary Neumann M 50
- Unique capsule made entirely of titanium
- Extended frequency response and unsurpassed impulse fidelity
- Tube circuit with electronically balanced output stage
- Very low self-noise
Technical data
- Acoustic mode of operation: pressure receiver
- Directivity: Omnidirectional
- Transmission range: 20 Hz ... 20 kHz
- Field transfer factor at 1 kHz at 1 kOhm: 20 mV/Pa
- Nominal impedance: 50 ohms
- Nominal load impedance: 1 kOhm
- Substitute noise level, CCIR 1: 28 dB
- Replacement noise level, A-weighted 2: 15 dB-A
- Limit sound pressure level (tube characteristic) for k < 0.5% 3: 114 dB
- Limit sound pressure level (tube characteristic) for k < 5% 4: 134 dB
- Noise level ratio, CCIR (rel. 94 dB SPL) 5: 66 dB
- Noise level ratio, A-weighted (rel. 94 dB SPL) 6: 79 dB
- Maximum output voltage: 8 dBu
- Dynamic range of the amplifier, DIN/IEC 651, for k < 0.5% 7: 99 dB
- Dynamic range of the amplifier, DIN/IEC 651, for k < 5% 8: 119 dB
- Power supply: N 149 A
- Required connector: Microphone: DIN 8 F, power supply: XLR 3 F
- Weight: 800g
- Diameter: 78 mm
- Length: 165 mm
2) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
3) measured as equivalent electrical input signal
4) measured as equivalent electrical input signal
5) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
6) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
7) measured as equivalent electrical input signal
8) measured as equivalent electrical input signal