Neumann KM 185 stereo set

  • Neumann KM 185 stereo set
  • Neumann KM 185 stereo set
  • Neumann KM 185 stereo set
Accessoires

Description

  • Set with 2x KM 185 (hypercardioid)
  • WNS 100 and SG 21
  • nickel
  • Top-class small diaphragm microphone
  • Hypercardioid characteristic without off-axis discoloration
  • Very low inherent noise
  • Very level stable
  • Transformerless switching


The KM 185 is a top-class small diaphragm microphone with a uniform, frequency-independent hypercardioid characteristic. Its natural, transparent sound with low noise and high level stability has made the KM 185 a worldwide stage and studio standard that covers almost all applications, from classical piano to heavy metal drums.

Features:

  • Consistent, frequency-independent hypercardioid characteristic
  • Good suppression of unwanted sound components
  • Linear frequency response with slight treble boost
  • Very low inherent noise (15 dB-A)
  • Low output impedance allows long cable runs without loss of sound
  • Compact design, visually inconspicuous
  • Acoustic mode of operation: Pressure gradient receiver
  • Directional pattern: Hypercardioid
  • Transmission range: 20 Hz ... 20 kHz
  • Field transfer factor at 1 kHz at 1 kOhm: 10 mV/Pa ± 1 dB
  • Nominal impedance: 50 ohms
  • Nominal load impedance: 1 kOhm
  • Substitute noise level, CCIR 1: 24 dB
  • Replacement noise level, A-weighted 2: 15 dB-A
  • Limit sound pressure level for k < 0.5% 3: 142 dB
  • Noise level ratio, CCIR (rel. 94 dB SPL) 4: 70 dB
  • Noise level ratio, A-weighted (rel. 94 dB SPL) 5: 79 dB
  • Maximum output voltage: 10 dBu
  • Power supply (P48, IEC 61938): 48 V ± 4 V
  • Current consumption (P48, IEC 61938): 3.2 mA
  • Required connector: XLR 3 F
  • Weight: approx. 80 g
  • Diameter: 22 mm
  • Length: 107 mm
1) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
2) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
3) measured as equivalent electrical input signal
4) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
5) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value