Yamaha MG10 mixing console
Description
- 10-channel mixing console
- Max. 4 microphone / 10 line inputs (4 mono + 3 stereo)
- 1 stereo bus
- 1 AUX (incl. FX)
- “D-PRE” microphone preamplifier with inverted Darlington circuit
- 1-button compressors
- PAD switch for mono inputs
- +48V phantom power
- XLR balanced outputs
- Metal housing
- Dimensions (W×H×D): 244 mm x 71 mm x 294 mm
- Weight: 1.9 kg
- Phantom power: +48 V
- Mono[MIC/LINE]: 4
- Stereo[LINE]: 3
- Stereo Out: 2
- Monitor Out: 1
- Phones: 1
- AUX Send: 1
- Bus: Stereo: 1, AUX[FX]: 1
- PAD: 26 dB (Mono)
- HPF: 80 Hz, 12 dB/oct (mono)
- COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, release time: approx. 300 msec
- EQ High: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
- EQ Mid: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
- EQ Low: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
- Peak LED: LED turns on when post EQ signal reaches 3 dB below clipping
- Level Meter: 2 x 7-segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
- Total harmonic distortion: 0.02% @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003% @ +24dBu (1kHz), GAIN knob: Min
- Frequency response: +0.5 dB/-1.0 dB (20 Hz to 48 kHz), refer to the nominal output level @ 1 kHz, GAIN knob: Min
- Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150O, GAIN knob: Max)
- Residual output noise: -102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
- Crosstalk: -83 dB
- Power requirements: PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha
- Power consumption: 22.9 W
- Dimensions: 244 mm x 71 mm x 294 mm
- Weight: 1.9 kg
Accessories:
- Included - AC Adapter, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adapter BMS-10A
Others:
- Operating Temperature: 0 to +40°C