Accessoires
Neumann KK 105 S
Description
- Supercardioid characteristic with high feedback resistance
- Neumann condenser capsule with studio sound quality
- For Sennheiser SKM 5000 and 5200 handheld transmitters
- Capacitor
- Supercardioid
- nickel
The KK 105 S is a capsule head for Sennheiser SKM 5000/5200 handheld transmitters with premium sound quality, thanks to a precision-made Neumann capacitor capsule. At the same time, it offers wireless freedom and all the virtues of a robust stage microphone: excellent pop protection, enormous level stability and high feedback security.
Features
- Neumann sound for Sennheiser SKM 5000/5200 wireless systems
- Consistent supercardioid characteristic without off-axis sound coloration
- Feedback-proof, high rejection of rear sound (120°)
- Extremely level stable
- Built-in pop filter, low hand noise
- Easy to clean
Technical data
- Picture pattern: Supercardioid
- Transmission range: 80 Hz ... 20 kHz
- Field transfer factor at 1 kHz at 1 kOhm: 1.3 mV/Pa ± 1 dB corresponding to -58 dBV
- Substitute noise level, CCIR 1: 44 dB
- Replacement noise level, A-weighted 2: 33 dB-A
- Limit sound pressure level for k < 0.5% 3: 150 dB
- Limit sound pressure level for k < 3% 4: 155 dB
- Noise level ratio, CCIR (rel. 94 dB SPL) 5: 50 dB
- Noise level ratio, A-weighted (rel. 94 dB SPL) 6: 61 dB-A
- Weight: approx. 325 g (including Tranmitter + power supply unit)
- Diameter: 48 mm
- Length: 257 mm (incl. transmitter)
- Limit sound pressure level for k < 3% 7: 155 dB
- Frequency range (transmitter): 450 - 960 MHz
- Switching bandwidth: 24 MHz
- Transmission frequencies: 16
- RF output power: 50 mW (-3 dB)
- Noise reduction system: Sennheiser “HiDyn plusTM”
2) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
3) measured as equivalent electrical input signal
4) measured as equivalent electrical input signal
5) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
6) according to IEC 60268-1; CCIR rating according to CCIR 468-3, quasi-peak value; A rating according to IEC 61672-1, effective value
7) measured as equivalent electrical input signal