EUROLITE Set LED KLS Laser Bar FX + M-3 speaker stand
Description
Bar with 2 derbies, 2 spots, white strobe LEDs and laser including speaker stand
EUROLITE LED KLS Laser Bar FX light set
Bar with 2 derbies, 2 spots, white strobe LEDs, laser (RG, 2M), foot switch
- Cross beam with integrated DMX control unit and tripod sleeve
- Project 2 laser diodes hundreds of red and green laser beams
- 2 rotating derbies for mirror ball effects
- For areas of application such as: wedding/gala/events; Mobile use
- This effect is particularly effective when using fog
- 37 integrated show programs
- The device is cooled via fans
- Controllable via stand-alone; DMX; IR remote control; Music control via microphone; wireless foot switch; Master/Slave function
- With mounting bracket
- Already pre-programmed with Light´J; LED PC Control 512; Light Captain; EASY SHOW 1; EASY SHOW 2; EASY SHOW 3
- Mains input and output for easy interconnection of up to 8 devices
- Laser; rays effect; strobe effect; Flower effect
Laser
- Laser class 2M
no acceptance or appointment of a laser safety officer required
Headlights
- 3 powerful LEDs 3 W high-power 3in1 TCL RGB (homogeneous color mixing)
2 spots can be controlled individually - With one Beam angle of 13°
Light effect
- 3 powerful LEDs 1 W high-power R/G/B
2 spots individually controllable
Strip
- 4 powerful LEDs 1 W high-power cold white (CW)
LEDs can be controlled individually
Scope of delivery
- 1 x operating instructions, 1 x declaration of conformity, 1 x power cable/power cable, 1 x foot switch, 1 x remote control, 2 x battery, 2 x mounting bracket, 2 x knurled screw, 1 x bag, 2 x washer
OMNITRONIC M-3 speaker stand
Box stand, extendable up to 180 cm, maximum load 30 kg
- Stable speaker stand for mobile use
- Height adjustable
Scope of delivery
- 1 x tripod, 1 x user manual
| Weight: | 12.25 kg |
| EUROLITE LED KLS Laser Bar FX light set | |
| Power supply: | 100-240 V AC, 50/60 Hz td> |
| Total connected load: | 50 W |
| Protection rating: | IP20 |
| Protection class: | SK I |
| Power connection: | Power supply via cold devices (M ) Built-in version Power connection cable with protective contact plug (included) |
| Power output: | 1 x cold devices (W) Built-in version |
| 5 x 20 mm, F 1 A fuse, replaceable | |
| Lamp type: | LED lamp |
| Flash rate: | 0 - 30 Hz |
| DMX channels: | 3 ; 5; 9; 27 |
| DMX input: | 1 x 3-pin XLR (M) built-in version |
| DMX output: | 1 x 3-pin XLR (W) built-in version |
| Cooling: | Fan | < /tr>
| Control: | Stand-alone; DMX; IR remote control; Music control via microphone; wireless foot switch; Master/Slave function |
| Pre-programmed for: | Light´J; LED PC Control 512; Light Captain; EASY SHOW 1; EASY SHOW 2; EASY SHOW 3 |
| Housing color: | Black |
| Recording system: | 2x mounting bracket |
| Dimensions: | Width: 1.09 m Depth: 14.5 cm Height: 37 cm |
| Weight: | 9.05 kg |
| Noise classification: | Class 2 ( slight noises) |
| Laser | |
| Laser class: | 2M |
| Laser color: | R/G |
| Laser module: | Red (R) 100 mW 650nm Green (G) 30 mW 532nm |
| Headlight | |
| LED: | 3 x 3 W high-power 3in1 TCL RGB (homogeneous color mixing) |
| Beam angle: | 13° |
| Beam angle (1/2 peak): | 13° |
| Beam angle (1/10 peak): | 20° |
| Light effect | |
| LED: | 3 x 1 W high-power R/G/B |
| Bar | |
| LED: | 4 x 1 W high-power cold white (CW) |
| Beam angle (1/2 peak): | 7° |
| Footswitch | |
| Battery: | 1 x 9.0 V E-Block 6LR61 alkaline manganese included |
| Remote control | |
| Battery: | 1 x button cell 3.0 V CR2025 lithium manganese built in |
| OMNITRONIC M-3 speaker stand | |
| Maximum load capacity: | 30 kg | tr>
| Height: | Maximum: 182 cm Minimum: 100 cm |
| Recording system: | Ø 35mm |
| Type (tripods in general): | Hand-extended tripod/speaker stand |
| Material:< /td> | Steel (powder-coated) |
| Color: | Black, painted |
| Weight: | 3.20 kg |
