AUDAC TR106
Description
- Isolated audio transformer
- Suitable for line level
- Transmission ratio 1:1, 600 ohms / 600 ohms
- Frequency response: 20 Hz - 20 kHz (+/- 3dB)
- Input impedance: 600 Ω
- Maximum input level (at 1% THD+N) : 20 Hz: +2 dBu (0.975V), 50 Hz: +10 dBu (2.449V)
- Output impedance: 600 Ω
- Transmission ratio: 1: 1
- Bandwidth: 0.5 Hz - 100 kHz
- Typical distortion (at 1 kHz): 0.001%.
- Frequency response: 20 Hz - 20 kHz (+/- 3dB), upper limit frequency (± 3 dB): 108 kHz, lower limit frequency (± 3 dB): 0.4 Hz
- Dimensions: 17 x 17.2 x 16.5 mm (W x H x D)
The AUDAC TR106 is a shielded audio transformer with true isolation.
Hum in audio systems is usually caused by ground loops in the system.
A common mode current flows in a ground loop created by an electrical system grounded at different voltage potentials.
This results in a 50 Hz hum in the audio signal, which can be avoided using an audio transformer.
The AUDAC TR106 with an input and output impedance of 600 ohms and a gear ratio of 1:1 has a very wide bandwidth and very low distortion, ensuring undistorted bass reproduction and undamped high frequencies.
1
Eng Datenblatt TR106
