AUDAC COM12MK2
Description
- 2 unbalanced stereo line inputs
- 6 x microphone inputs with phantom power (4 x) and priority (2 x)
- 120 watts (RMS) output power
- Link inputs and outputs for the power amplifier
- Paging input, gong and mute contacts
- Zone selection buttons (5 zones)
- Low ohm and 100V outputs
- Rack mount or freestanding
- Power, RMS: 120 W
- Frequency response (+/- 3 dB): 20 Hz - 20 kHz
- Noise ratio: > 90 dB
- THD+N (@ 1 kHz) : < 0.5%
- Crosstalk (@ 1 kHz): > 70 dB
- Technology: Class A/B
- Power supply: transformer
- Power supply: 230 - 240 V AC / 50 - 60 Hz
- Common mode rejection CMR: 70 dB
- Inputs: 4 x Mic./Line, balanced (-6 dB / -50 dB), 2x XLR & 2x XLR combo socket, 15V phantom power / 1 x Mic./Line, balanced (-6 dB / -50 dB) , 6.3 mm jack / 1 x stereo line, unbalanced (+14 dB / -30 dB) RCA / paging microphone (priority, microphone + gong) / telephone input (priority, line)
- Phantom voltage: 15 V DC (Mic. 1-4)
- Priority: Mute contact
- Outputs: 100 V / 4 Ω Euroblock
- Protection circuits: DC short circuit, overheating, overload, signal limiter
- Cooling: convection cooling
- Operating temperature: 0° - 40° @ 95% humidity
- Dimensions: 420 x 88 x 320 mm (W x H x D)
- Weight: 9.7 kg
- Mounting: 19" / 1 U or free-standing
The mixer amplifiers from the COM series are the ideal solution for small to medium-sized commercial sound systems. The amplifiers are available with different connection options and output powers and are characterized by enormous flexibility for a variety of applications. The COM12 offers an output power of 120 watts and is suitable for use in 100 volt ELA systems or low ohm systems (4 ohm impedance). Six input channels with independent level control allow you to connect and mix a wide variety of sources. Four balanced XLR microphone inputs with 15 V phantom power are available for connecting microphones (practically all dynamic and condenser microphones), two of which have a priority function. Two further inputs can be used either as unbalanced stereo line inputs (RCA) for connecting CD players, music computers or mobile devices or as microphone inputs (6.3 mm jack) - so if required A total of 6 microphone inputs are available. In addition, the mixer amplifier has a paging microphone and a tele-pager input to expand the system for announcements (with gong/beep) or for connection to a telephone system (or any other system with priority). If the “Priority Mute” contact is occupied, coupling and muting can take place via an external fire alarm system. The output level can be controlled via a master volume control with 2-band tone control. The level is displayed using a VU bar display (5 segments). Zone selection buttons (5 zones) are available for selecting the outputs. The amplifier is suitable for both table installation and installation in a 19 rack (2 U, rack adapter included).
Eng Datenblatt COM12
