Admiral Snake stacking and anchor set set black

Description

  • 4 x M8 Nyloc nuts, black
  • 4 x grid U-wire holders 51 x 75 mm M8, black
  • 4 x diving caps RD 13x 25mm PVC
  • 4 x M8 x 24mm high nuts


    • Snake stack and anchor set black
    This set contains 2 stack brackets, 2 anchors and a mouting kit, all in black.
    The Black stacking brackets are the brackets that support the snake when it is folded.
    Depending on the size of your snake, you will need 2, 3 or 4 brackets to support the weight of the stacked length pieces.
    With 2 black ones You can anchor your snake to the ceiling or a pipe at the top and to your truss or single pipe at the bottom.
    The pre-drilled holes fit into an M8 U-bracket included in the assembly kit or an M10 screw.
    The black mounting kit included in this kit is needed to attach the snake to a single pipe and anchor it to the ceiling.
    In this kit you will find:

    • 4 x M8 Nyloc nuts, black
    • 4 x grid U-wire holders 51 x 75 mm M8, black
    • 4 x diving caps RD 13x 25mm PVC
    • 4 x M8 x 24mm high nuts

    For mounting on a truss, depending on the truss dimensions, you will also need the external set for 30 trusses (zinc: RIKGSN121 or black: RIKGSN121B) or 40 trusses (black: RIKGSN122B).
    Always follow our safety guidelines for Snakes when it comes to the height of your snake.
    Stacking too many pieces on top of each other creates an unstable structure.
    The stacking brackets are not long enough to provide support when building a snake, which is higher than our recommendations.
    In addition, a high stack of elements blocks your framework in the upper position. (The framework cannot be lifted against the ceiling).