Endstufen bis 800 W an 4 Ohm

Dap Audio CX-1500 - 2x 750W Amplifier

  • 256mm installation depth
  • Full protection circuits
  • Selectable input sensitivity
  • Efficient forced air cooling
Item no.: D4164

Dap Audio DM-1000 - 2x 500W Class-D amplifier

  • High level of reliability due to full protection circuit
  • Ultra lightweight (6,2Kg)
  • PFC Digital Power Supply
Item no.: D4212

Dap Audio PA-500 - 500W 100V Amplifier

  • 500W
  • Loop through connection
  • RCA, XLR, Terminal input
  • 24V Back up power input
Item no.: D6161

Showtec P-1200

  • Affordable and reliable power
  • Over 12 years of proven quality
  • Advanced protection circuits
  • Natural sound quality
Item no.: D4135

Showtec P-900

  • Affordable and reliable power
  • Over 12 years of proven quality
  • Advanced protection circuits
  • Natural sound quality
Item no.: D4134

LD Systems DEEP2 1600 - PA Power Amplifier 2 x 800 W 2 Ohms

The LD Systems DP1600 Power Amplifier offers an amplifiying level of 2 x 800 W @ 2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.

The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs.

The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.

The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.

Specifications:

  • Model Name: DP1600
  • Output Power @ 1 kHz:
    • 2 Ohm: 2 x 800W
    • 4 Ohm: 2 x 650W
    • 8 Ohm: 2 x 450W
    • Bridge 4 Ohm: 1600W
    • Bridge 8 Ohm: 1300W
  • Output Circuity: Class H
  • Frequency Range: 20 Hz - 20 kHz
  • THD:
  • S/N Ratio: 106dB
  • Damping Factor: >400 at 8 Ohms
  • Crosstalk: >80 dB
  • Voltage Gain: 38 dB
  • Input Sensitivity: 0.775 V
  • Input Impedance: >20 kOhm
  • Protection: DC, Temp, Short Circuit, Over Current
  • Controls: On/Off, 2xVolume, Ground lift, Bridge/Stereo
  • Indicators: Power, Signal, Volume, Limit, Protect
  • Connectors:
    • Input: XLR/6,3mm Jack (Combo)
    • Link Output: XLR
    • Output: Speakon compatible / Binding post
    • AC Input: Volex Power Plug
  • Cooling System: High efficienty, two speed auto controlled fan
  • Cooling tunnel: from front to back
  • Power Supply: AC ~ 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 370 mm
  • Weight: 15,9 kg
Item no.: ADHLDDP1600

LD Systems DEEP2 600 - PA Power Amplifier 2 x 300 W 2 Ohms

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W @ 2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.

The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs.

The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.

The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.

Features:

  • Model Name: DP600
  • Output Power @ 1 kHz:
    • 2 Ohm: 2 x 300 W
    • 4 Ohm: 2 x 400 W
    • 8 Ohm: 2 x 300 W
    • Bridge 4 Ohm: 600 W
    • Bridge 8 Ohm: 800 W
  • Output Circuity: Class H
  • Frequency Range: 20 Hz - 20 kHz
  • THD:
  • S/N Ratio: 105dB
  • Damping Factor: >400 at 8 Ohms
  • Crosstalk: >80 dB
  • Voltage Gain: 35 dB
  • Input Sensitivity: 0.75 V
  • Input Impedance: >20 kOhm
  • Protection: DC, Temp, Short Circuit, Over Current
  • Controls: On/Off, 2xVolume, Ground lift, Bridge/Stereo
  • Indicators: Power, Signal, Volume, Limit, Protect
  • Connectors:
    • Input: XLR / 6,3 mm Jack (Combo)
    • Link Output: XLR
    • Output: Speakon compatible / Binding post
    • AC Input: Volex Power Plug
  • Cooling System: High efficienty, two speed auto controlled fan
  • Cooling tunnel: from front to back
  • Power Supply: AC ~ 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 350 mm
Item no.: ADHLDDP600

LD Systems DJ 800 - PA Power Amplifier 2 x 400 W 4 Ohms

LD Systems DJ800 Power Amplifier

The DJ800 is the most powerful power amplifier in LD Systems' DJ series. The dependable Class AB design has an output of 400W per channel @ 4 ohms, 2x 240W @ 8 ohms and 800W in switchable bridge mode. Weighing in at just 10 kg, it is perfect for mobile use, but also for installation.

The DJ800 is equipped with extensive protection circuitry and a power-on delay. The front panel perforations and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch eliminates ground loop hum.  LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ800 functions in the entire frequency range of 20Hz - 20kHz with maximum dependability, dynamics, and impulse fidelity.

  • Type: 2-channel
  • Output Power 1 KHz @ 4 ohms: 2 x 400 W
  • Output Power 1 KHz @ 8 ohms: 2 x 240 W
  • Output Power 1 KHz @ Bridge 8 ohms: 800 W
  • Output Circuity: Class A/B
  • Frequency Range: 20 - 20.000 Hz
  • THD: 0,05%
  • Voltage Gain: 32dB
  • Input Sensivity: 0,85V
  • Protection: Soft start, short circuit, DC, Temperature, over current
  • Controls: ON/ OFF, Volume, Mode (Bridge/ Stereo), Ground-Lift
  • Indicators: Power, Clip, Protect
  • Connectors Line Input: 2 x XLR, 2 x 6,3mm jack
  • Connectors Speaker Output: 2 x Speakon compatible, 2 x binding post
  • Cooling System: Fan
  • Power Supply: 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 298 mm
Item no.: ADHLDDJ800

LD Systems SP 1K8 - PA Power Amplifier 2 x 880 W 2 Ohm

The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether youâ??re starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, youâ??ll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.

  • Model Name: SP1K8
  • Output Power 1 kHz,
    • 2 Ohm 2 x 880 W
    • 4 Ohm 2 x 575 W
    • 8 Ohm 2 x 325 W
    • Bridge at 4 Ohm 1760 W
    • Bridge at 8 Ohm 1150 W
  • Output Circuity: Class H
  • Frequency Range (power bandwidth ± 0.25 dB): 20 Hz - 20 kHz
  • THD (20 Hz - 20 kHz):
  • S/N Ratio: 112 dB
  • Damping Factor (20 Hz - 500 Hz at 8 Ohm): > 500
  • Crosstalk (20 Hz - 20 kHz): > 75 dB
  • Voltage Gain (selectable): 26 / 32 / 38 dB
  • Input Sensitivity: 2.6 / 1.3 / 0.6 V
  • Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (Soa Sentry Protection)
  • Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
  • Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
  • Connectors:
    • Input: 2 x XLR
    • Line Output: 2 x XLR
    • Speaker Output: 2 x Speakon
  • Power Supply: 230 V - 50 Hz
  • Dimensions (W x H x D): 483 Ã? 88.9 Ã? 310 mm
Item no.: ADHLDSP1K8

LD Systems SP 2K4 - PA Power Amplifier 2 x 1190 W 2 Ohm

The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether youâ??re starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, youâ??ll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.

  • Model Name: SP2K4
  • Output Power 1 kHz,
    • 2 Ohm 2 x 1190 W
    • 4 Ohm 2 x 790 W
    • 8 Ohm 2 x 460 W
    • Bridge at 4 Ohm 2380 W
    • Bridge at 8 Ohm 1580 W
  • Output Circuity: Class H
  • Frequency Range (power bandwidth ± 0.25 dB): 20 Hz - 20 kHz
  • THD (20 Hz - 20 kHz):
  • S/N Ratio: 113 dB
  • Damping Factor (20 Hz - 500 Hz at 8 Ohm): > 500
  • Crosstalk (20 Hz - 20 kHz): > 75 dB
  • Voltage Gain (selectable): 26/32/38 dB
  • Input Sensitivity: 3.0 / 1.5 / 0.8 V
  • Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (SOA Sentry Protection)
  • Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
  • Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
  • Connectors:
    • Input: 2 x XLR
    • Line Output: 2 x XLR
    • Speaker Output: 2 x Speakon
  • Power Supply: 230 V - 50 Hz
  • Dimensions (W x H x D): 483 Ã? 88.9 Ã? 310 mm
Item no.: ADHLDSP2K4

LD Systems XS 700 - PA Power Amplifier Class D 2 x 350 W 4 Ohms

LD Systems XS700 Power Amplifier

The XS700 is the flagship of the XS series of power amplifiers and an absolute flyweight with just 1U and 3.4kg. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The power amp has an output of 350W per channel at 4 ohms, 2x 200W at 8 ohms, and 700W in bridged mode. It is conceived for all professional applications in which ease of transport and space is essential, whether mobile or in permanent installations.

The XS700 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay.

The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS700 impresses with operational dependability and a transmission range of 20Hz - 20kHz, which is reproduced transparently and dynamically with high impulse fidelity.

  • Type: 2-channel
  • Output power (1 kHz @ 4 ohms): 2 x 350 W
  • Output power (1 kHz @ 8 ohms): 2 x 200 W
  • Output power (1 kHz @ 8 ohms, bridged mode): 700 W
  • Circuit concept: Class D
  • Frequency response: 20 - 20,000 Hz
  • THD:
  • Voltage gain: 36 dB / 27 dB / 31 dB
  • Input sensitivity: 0.6 V / 1.7 V / 1.1 V
  • Protection: Soft-start, short-circuit, DC, overheating, overvoltage
  • Controls: On/Off, Volume, Mode (bridge / parallel / stereo), Ground Lift, Limiter, Gain
  • Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
  • Line input connectors: 2 x XLR,  2 x 6.3 mm jack, chinch
  • Speaker output connections: 2 x Speakon-compatible, 2 x terminal post
  • Cooling System: low-noise fan
  • Power supply: switching power supply
  • Power Consumption @ Full Load: 860 W
  • Operating voltage: 115 V AC / 230 V AC (switchable)
  • Width: 482 mm
  • Height: 44 mm
  • Depth: 244 mm
Item no.: ADHLDXS700

Nova X 1200

Die Modelle der X-Serie sind zweikanalige Verstärker auf einer Bauhöhe von 2 bzw. 3 HE (Höheneinheiten). An der Frontseite befinden sich zwei versenkte Level-Potentiometer mit Rasterung sowie der Netzschalter. Das leicht ablesbare LED Display informiert über den Betriebszustand der Endstufen. An der Rückseite befinden sich zwei Eingangsbuchsen und 2 Ausgangsbuchsen (Link) in XLR Bauweise. Die Eingangsempfindlichkeit aller Modelle der X-Serie beträgt 32 dB. Die Leistungsausgänge beider Kanäle sind in SPEAKON© Variante ausgeführt. Am Ausgang 1 liegt auf den Pins 2 (+/-) zusätzlich das Signal des Ausgangs 2 an. Dies ermöglicht eine vierpolige Verkabelung von 2-Wege Lautsprechersystemen. Die Leistungsausgänge beider Kanäle sowie der Bridge Ausgang stehen ebenso über Binding Posts zur Verfügung (nicht bei X6000). Die Betriebsmodi Stereo, Parallel und Bridge können über einen Schalter ausgewählt werden. Der Limiter kann an einem Schalter ein- oder ausgeschaltet werden. Alle Modelle der X-Serie verfügen über eine Einschaltverzögerung mittels Relais, welche das Ansprechen von Netzsicherungen verhindern. Ebenso werden die Leistungsausgänge verzögert zugeschaltet.
Item no.: NO22164

Nova X 800

Item no.: NO22161

OMNITRONIC SMA-1500 Amplifier

  • Stereo PA amplifier with integrated limiter and SMPS 2 x 750 W/4 ohms
  • Low weight and height due to integrated switch-mode power supply
  • Temperature-controlled fan, particularly quiet during operation
  • Limiter and speaker switch-on delay
Item no.: 10451086

Dap Audio P-700 - 2U High Power Class-AB Stereo PA Amplifier Silver

  • Affordable and reliable power
  • Over 12 years of proven quality
  • Advanced protection circuits
  • Natural sound quality
Item no.: D4133
Contact person