Endstufen bis 300 W an 4 Ohm

Dap Audio P-400 - Stereo Power Amplifier Silver

  • Affordable and reliable power
  • Over 12 years of proven quality
  • Advanced protection circuits
  • Natural sound quality
Item no.: D4131

Dap Audio PA-250 - 250W 100V Amplifier

  • 250W
  • Loop through connection
  • RCA, XLR, Terminal input
  • 24V Back up power input
Item no.: D6160

LD Systems DEEP2 4950 - PA Power Amplifier 4 x 810 W 4 Ohms

The LD Systems DP4950 Power Amplifier offers an amplifiying level of 4 x 810 W @ 4 Ohm


During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.

The DEEP2 series features a Clip Limiter as well as every common protection circuits. On the rear panel you will find all the common In- and Outputs.

The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.

The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.

Specifications:

  • Model Name: DP4950
  • Output Power @ 1 kHz:
    • 4 Ohm: 4 x 810 W
    • 8 Ohm: 4 x 490 W
    • Bridge 8 Ohm: 2x 1600 W
  • Output Circuity: Class H
  • Frequency Range: 20 Hz - 20 kHz
  • THD:
  • S/N Ratio: 105dB
  • Damping Factor: >400 at 8 Ohms
  • Crosstalk: >70 dB
  • Voltage Gain: 38 dB
  • Input Sensitivity: 0.775 V
  • Input Impedance: >20 kOhm
  • Protection: DC, Temp, Short Circuit, Over Current
  • Controls: On/Off, 2xVolume, Ground lift, Bridge/Stereo
  • Indicators: Power, Signal, Volume, Limit, Protect
  • Connectors:
    • Input: XLR
    • Link Output: XLR
    • Output: Speakon compatible / Binding post
    • AC Input: Volex Power Plug
  • Cooling System: High efficienty, two speed auto controlled fan
  • Cooling tunnel: from front to back
  • Power Supply: AC ~ 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 370 mm
  • Weight: 19,6 kg
Item no.: ADHLDDP4950

LD Systems DJ 300 - PA Power Amplifier 2 x 150 W 4 Ohm

LD Systems DJ300 Power Amplifier

The DJ300 is a value-priced, full-featured Class AB power amplifier with an output of 150W per channel @ 4 ohms and 250W in 8-ohm bridge mode. Its sturdy construction paired with low weight makes it perfect for DJs in mobile use and smaller permanent installations.

It has extensive protection circuitry, a low-noise cooling fan, and a power-on delay. It uses XLR and stereo TRS sockets as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ300 functions in the entire frequency range of 20Hz -20kHz with high dependability, dynamics, and impulse fidelity.

  • Type: 2-channel
  • Output Power 1 KHz @ 4 ohms: 2 x 150 W
  • Output Power 1 KHz @ 8 ohms: 2 x 100 W
  • Output Power 1 KHz @ Bridge 8 ohms: 250 W
  • Output Circuity: Class A/B
  • Frequency Range: 20 - 20.000 Hz
  • THD: 0,05%
  • Voltage Gain: 28dB
  • Input Sensivity: 0,85V
  • Protection: Soft start, short circuit, DC, Temperature, over current
  • Controls: ON/ OFF, Volume, Mode (Bridge/ Stereo), Ground-Lift
  • Indicators: Power, Clip, Protect
  • Connectors Line Input: 2 x XLR, 2 x 6,3mm jack
  • Connectors Speaker Output: 2 x Speakon compatible, 2 x binding post
  • Cooling System: Fan
  • Power Supply: 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 298 mm
Item no.: ADHLDDJ300

LD Systems DJ 500 - PA Power Amplifier 2 x 250 W 4 Ohms

LD Systems DJ500 Power Amplifier

The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel @ 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations.

The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ500 functions in the entire frequency range of 20Hz - 20kHz with extremely high dependability, dynamics, and impulse fidelity.

  • Type: 2-channel
  • Output Power 1 KHz @ 4 ohms: 2 x 250 W
  • Output Power 1 KHz @ 8 ohms: 2 x 150 W
  • Output Power 1 KHz @ Bridge 8 ohms: 500 W
  • Output Circuity: Class A/B
  • Frequency Range: 20 - 20.000 Hz
  • THD: 0,05%
  • Voltage Gain: 30dB
  • Input Sensivity: 0,85V
  • Protection: Soft start, short circuit, DC, Temperature, over current
  • Controls:ON/ OFF, Volume, Mode (Bridge/ Stereo), Ground-Lift
  • Indicators: Power, Clip, Protect
  • Connectors Line Input: 2 x XLR, 2 x 6,3mm jack
  • Connectors Speaker Output: 2 x Speakon compatible, 2 x binding post
  • Cooling System: Fan
  • Power Supply: 230V / 50-60 Hz
  • Dimensions (W x H x D): 483 x 88 x 298 mm
Item no.: ADHLDDJ500

LD Systems SP 1K8 - PA Power Amplifier 2 x 880 W 2 Ohm

The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether youâ??re starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, youâ??ll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.

  • Model Name: SP1K8
  • Output Power 1 kHz,
    • 2 Ohm 2 x 880 W
    • 4 Ohm 2 x 575 W
    • 8 Ohm 2 x 325 W
    • Bridge at 4 Ohm 1760 W
    • Bridge at 8 Ohm 1150 W
  • Output Circuity: Class H
  • Frequency Range (power bandwidth ± 0.25 dB): 20 Hz - 20 kHz
  • THD (20 Hz - 20 kHz):
  • S/N Ratio: 112 dB
  • Damping Factor (20 Hz - 500 Hz at 8 Ohm): > 500
  • Crosstalk (20 Hz - 20 kHz): > 75 dB
  • Voltage Gain (selectable): 26 / 32 / 38 dB
  • Input Sensitivity: 2.6 / 1.3 / 0.6 V
  • Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (Soa Sentry Protection)
  • Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
  • Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
  • Connectors:
    • Input: 2 x XLR
    • Line Output: 2 x XLR
    • Speaker Output: 2 x Speakon
  • Power Supply: 230 V - 50 Hz
  • Dimensions (W x H x D): 483 Ã? 88.9 Ã? 310 mm
Item no.: ADHLDSP1K8

LD Systems XS 400 - PA Power Amplifier Class D 2 x 200 W 4 Ohms

LD Systems XS400 Power Amplifier

The XS400 is an extremely compact, dependable Class D power amplifier with an output of 200W per channel at 4 ohms 400W in 8-ohm bridged mode, and a wide transmission range of 20Hz - 20kHz. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The XS400, at 1U and a weight of 3.4kg, is conceived for all professional applications in which ease of transport or space is important, whether mobile or in permanent installations.

The XS400 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay. The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The transparent sound of the XS400 stands out with high dynamics and impulse fidelity.

  • Type: 2-channel
  • Output power (1 kHz @ 4 ohms): 2 x 200 W
  • Output power (1 kHz @ 8 ohms): 2 x 100 W
  • Output power (1 kHz @ 8 ohms, bridged mode): 400 W
  • Circuit concept: Class D
  • Frequency response: 20 - 20,000 Hz
  • THD:
  • Voltage gain: 32 dB / 26 dB / 28 dB
  • Input sensitivity: 0.68 V / 1.4 V / 1.2 V
  • Protection: Soft-start, short-circuit, DC, overheating, overvoltage
  • Controls: On/Off, Volume, Mode (bridge / parallel / stereo), Ground Lift, Limiter, Gain
  • Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
  • Line input connectors: 2 x XLR,  2 x 6.3 mm jack, chinch
  • Speaker output connections: 2 x Speakon-compatible, 2 x terminal post
  • Cooling System: low-noise fan
  • Power supply: switching power supply
  • Power Consumption @ Full Load: 470 W
  • Operating voltage: 115 V AC / 230 V AC (switchable)
  • Width: 482 mm
  • Height: 44 mm
  • Depth: 244 mm
Item no.: ADHLDXS400

Showtec P-500

  • Affordable and reliable power
  • Over 12 years of proven quality
  • Advanced protection circuits
  • Natural sound quality
Item no.: D4132

Denon Professional DN470A

  • 4-Channel Class-D amplifier designed for 70V/100V applications
  • 120W per channel
  • High-current switching power design
  • Euroblock inputs and outputs
Item no.: DN106102

Denon Professional DN474A

  • 4-Channel Class-D amplifier
  • 2 X 120 Watts with 70V/100V outputs
  • 2 X 150/90 Watts with 4/8-ohm loads
  • Euroblock inputs and outputs
  • Item no.: DN106103

    Denon Professional DN508A

    • Eight channel (zones) inputs
    • Eight zone output (4 ohm, 70/100V)
    • 55W class D amplifier per zone
    • Individual level control per zone
    • Signal/Peak indicators for each zone
    Item no.: DN104887

    OMNITRONIC EDP-300 Class D amplifier

    • Stereo PA amplifier with integrated SMPS 2 x 180 W
    Item no.: 10451610

    OMNITRONIC SMA-600 Amplifier

    • Stereo PA amplifier with integrated limiter and SMPS 2 x 300 W/4ohms
    • Low weight and height due to integrated switch-mode power supply
    • Temperature-controlled fan, particularly quiet during operation
    • Limiter and speaker switch-on delay
    Item no.: 10451082
    Contact person