Seeburg TriSource 10
Description
The TriSource 10 speaker system was specifically designed for applications in combination with larger displays where very good sound quality and greater range are required. The good integration capability is achieved by the low installation depth and neutral appearance. Individually manufactured baffle covers are available to adapt to the different display sizes. The special arrangement of two 5” long-throw chassis and three horn-loaded 1.1” tweeters works according to the 3-source principle. This achieves particularly uniform vertical bundling in order to achieve a high proportion of direct sound even at greater distances.
Technical data
| TriSource 10 |
|
| Speaker Components | 2 x 5" Nd (1.5" VC) / 3 x 1" Nd (1.1" VC) |
| Description | Multi Media Column |
| Power AES / Peak | 200W / 600W |
| Amp Power AES | - - - |
| Impedance nominal | 4 O |
| Rated Current | - - - |
|
SPL 1 W / Peak @ 1 m |
90 dB / 118 dB |
| SPL Peak@1m | - - - |
| Max. Input Signal | - - - |
| DSP | - - - |
| AD / DA | - - - |
| Latency | - - - |
|
Usable Range |
50 Hz - 20 kHz (-6 dB) |
| Tuning Frequency excursion minimum | 55 Hz |
| X - Overpoint acoustical | 1200 Hz |
| Coverage horizontal / vertical | 100° x 25° |
| Max. Splay Angle | - - - |
| Connectors | 2 x Neutrik Speakon NL4MP in/out Coding: 1 +/- HiMid, 2 +/- loop thru |
| Handles | - - - |
| Rigging / Fittings | 2 x M10, 14 x M5, 2 x fixing holes |
| Weight | 8.5kg |
| Size height x width x depth | 93.0 x 18.0 x 13.7 cm |
| Order No. | 00120 |
1
Datenblatt
