Telefon: +49 34671 550240 | eMail:
Sennheiser EW D1-ME3-H-EU

Item number: 505801

evolution wireless D1 Headmic-Set with ME 3-II headmic for live stage use.

Category: Headset Microphones Wireless System

549,00 €

including 19% VAT., no shipping costs (Paketversand)

Must be ordered. Ready for shipment in 1 days

Shipping time: 2 - 4 workdays


evolution wireless D1 Headmic-Set with ME 3-II headmic for live stage use.

evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. ew D1 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission.

- Lightweight and robust: headset microphone for excellent speech intelligibility
- Up to 15 compatible channels (under optimal conditions) in license-free 2.4 GHz band
- Automatic frequency management
- Prevents interference: Intelligent channel back-up allows co-existence with Wi-Fi & Bluetooth
- Audio effects: equalizer, de-esser, automatic gain control
- iOS & Android app for remote control and monitoring of the system
- Sturdy metal housing

Technical Data

RF frequency range: 2,400 to 2,483.5 MHz
Dynamic range: > 135 dB (A)
THD, total harmonic distortion: typ. < 0,1 %
Audio sampling: 24 bit/48 kHz
Signal-to-noise ratio: = 105 dB (A)
Modulation: GFSK with back channel
Transmission method: TDMA, time diversity, frequency diversity, fast switching antenna diversity
Latency: 3.9 ms
Audio codec: APT-X Live
Operating temperature: Operation: ? 10 °C to +55 °C
Storage temperature: Storage: ? 20 °C to +70 °C (The temperature range is influenced by the battery characteristics)
Frequency response: 20 to 20.000 Hz

Latency: multi-frequency targets
RF sensitivity: <-90 dBm
RF output power: back channel 10 mW/100 mW (country-specific)
Audio output: Mic/line level switch ?24 dB/0 dB, XLR, balanced max +18 dBu, Jack, unbalanced/balanced max +12 dBu/max +18 dBu
Low-cut filter: ?3 dB at 120 Hz
Equalizer: 7-band graphic equalizer
Automatic gain control (AGC): compression/expansion with automatic make-up gain function
Display: OLED
Connection: XLR/¼" (6.3 mm) jack
Antenna connector: 2 x Rev-SMA
Network socket: RJ45
Network protocol: Media Control Protocol, TCP/IP IPv4 (DHCP, Manual)/IPv6
Power supply: 12 V DC hollow jack
Current consumption: 350 mA
Weight: approx. 824 g

RF output power: adaptive, up to 100 mW (country-specific)
Connection: 3.5 mm jack socket, lockable
Weight: approx. 85 g (w/o batteries)
Microphone: Frequency response: 50 to 20,000 Hz
Max. input level: 2.2 V RMS
Line: Frequency response: 20 to 20,000 Hz
Max. input level: 3.3 V RMS
Input impedance: 1 M?
Input sensitivity: automatic sensitivity adjustment
Battery Specification: 2 x AA size battery (1,5V), Operating time: typ. 6 h
Accupack: BA 30 (Li-Ion, 3.7V), Operating time: typ. 11 h

Microphone: pre-polarized condenser
Sensitivity: 1.6 mV/Pa
Pick-up pattern: cardioid
Max. sound pressure level: 150 dB SPL

What's in the box?
- EM-D1 rackmount receiver
- SK-D1 bodypack transmitter
- ME 3-II headset microphone
- NT-12 power supply
- Transport Case
- User Manual

Producer: Sennheiser

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: