Items from Palmer MI

Palmer MI CAB 112 GBK - Guitar Cabinet 1 x 12" with Celestion G 12 M Greenback 8 Ohms

Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:

  • Front-mounted speakers
  • Detachable grill
  • Solid workmanship
  • Speaker mount and quality check carried out in Germany
  • Cabinet impedance (mono): 8 ohms
  • Power Rating (mono): 25 W
  • Cabinet weight without speakers: 12 kg
  • Cabinet weight including speakers: 17 kg
  • Back: Open
  • Dimensions (W x D x H): 58 x 29 x 45cm
  • Front Grill: detachable
  • Speaker Mounting: 1 x 12" front mounted

G12M Greenback

The G12M Greenback has evolved over the decades but still retains its essential, sought-after tone.

This version exhibits all the classic G12M characteristics but is voiced with additional broad mid-range attack and restrained top-end to give a forward, punchy attitude to chords and a searing lead tone without fizz.

With its well-controlled low-end it can be used singly in low-powered amps, or in multiples for high-power rock heads. Itâ??s an ideal speaker to bring drive and definition to modern high gain amps.

SPECIFICATION

  • Nominal Basket Diameter: 12", 305 mm
  • Nominal Impedance: 8 ohms
  • Power Rating: 25 W
  • Resonance: 75 Hz
  • Usable Frequency Range: 75 Hz - 5 kHz
  • Sensitivity: 98 dB
  • Magnet Weight: 35 oz.
  • Voice Coil Diameter: 1.75", 44.5 mm
Item no.: ADHPCAB112GBK

Palmer MI CAB 212 - 2 x 12 Empty Guitar Cabinet

Palmer Cabinets are rugged, flexible and affordable guitar cabinets.

  • Front-loadable
  • Solid workmanship
  • Includes:
    • Connection plate with labelling fields
    • Connecting cable
    • Fastening screws
  • Number of speaker openings: 2
  • For speaker diameter: 12"
  • Connectors on connector plate: 2 x input mono/stereo
  • Connector type: 6.3 mm jack
  • Type of speaker installation: Front-loaded
  • Front grill removable: Yes
  • Back: Closed
  • Acoustic installation (inside): No
  • Front grill material: cloth
  • Cabinet material: Particle board
  • Cabinet covering: Imitation leather
  • Baffle material: MDF
  • Width: 710 mm
  • Height: 480 mm
  • Depth: 295 mm
Item no.: ADHPCAB212

Palmer MI ABI - Balanced line input switcher

The Palmer PEABI is more than a simple switcher for two sources; simultaneously, the PEABI also handles level adjustment for various sources. Whether microphone or line signal, the PEABI toggles silently between the two inputs and thus permits fast and simple comparison between signals or connection of various sources to one input. Three slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both inputs. A ground lift helps to avoid ground loop hum. Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. A red LED clearly indicates which input is currently active. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board. The PEABI's strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is required to power the LED.

Technical Specifications

  • Product type: switcher
  • Type: passive
  • Switch function: Input switcher
  • Number of channels: 2
  • Number of Inputs: 2
  • Input connections: XLR
  • Number of outputs: 1
  • Output connections: XLR
  • Outputs transformer balanced: no
  • Controls: Groundlift, Input PAD
  • Indicators: Channel number
  • Power Supply: 9-V block battery
  • Case Material: Sheet steel
  • Case surface: Powder coated
  • Dimensions (W x H x D): 100 mm x 60 mm x 120 mm
Item no.: ADHPEABI

Palmer MI ABO - Balanced Line Output Switch

The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs.

  • Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private.
  • Two different sound configurations. Suppose you sometimes want a different effect or sound on your microphone, for example, a "telephone effect" or more Hall. Run both outputs of the PEABO to two channels of the mixing desk - now you can configure these differently and toggle between the two channels onstage whenever you want.
  • You can also use the PEABO to address two different rooms or zones selectively.

Switching is controlled by a sturdy latching foot switch; the selected output is indicated by a red LED. Slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both outputs. A ground lift helps to avoid ground loop hum.

Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board.

The PEABO's strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is only required to power the LED.

Item no.: ADHPEABO

Palmer MI BATPACK 4000 - Rechargeable Pedalboard Power Supply, 4000mAh

  • Wiederaufladbare 9V DC Akku-Stromversorgung
  • Absolut frei von Störgeräuschen
  • Hochwertiger, langlebiger Lithium-Polymer-Akku
  • 2 isolierte und regulierte 9V DC Ausgänge
Item no.: ADHPBATPACK4000

Palmer MI BATPACK 8000 - Rechargeable Pedalboard Power Supply, 8000mAh

  • Wiederaufladbare 9V DC Akku-Stromversorgung
  • Absolut frei von Störgeräuschen
  • Hochwertiger, langlebiger Lithium-Polymer-Akku
  • 2 isolierte und regulierte 9V DC Ausgänge
Item no.: ADHPBATPACK8000

Palmer MI CAB 112 B - 1 x 12 Empty Guitar Cabinet

Palmer Cabinets are rugged, flexible and affordable guitar cabinets.

  • Front-loadable
  • Solid workmanship
  • Includes:
    • Connection plate with labelling fields
    • Connecting cable
    • Fastening screws
  • Number of speaker openings: 1
  • For speaker diameter: 12"
  • Connectors on connector plate: 2 x in/parallel out
  • Connector type: 6.3 mm jack
  • Type of speaker installation: Front-loaded
  • Front grill removable: Yes
  • Back: Open
  • Acoustic installation (inside): No
  • Front grill material: cloth
  • Cabinet material: Particle board
  • Cabinet covering: Imitation leather
  • Baffle material: MDF
  • Width: 580 mm
  • Height: 450 mm
  • Depth: 290 mm
Item no.: ADHPCAB112B

Palmer MI CAB 112 BAG - Protective Cover for Palmer 1 x12" Cabinets

Protective Cover for Palmer 1 x12" Cabinets

  • Product type: Bag
  • Colour: black
  • Material: Nylon
  • Dimensions: 580 mm x 450 mm x 290 mm
Item no.: ADHPCAB112BAG

Palmer MI CAB 112 G12A - Guitar Cabinet 1 x 12" with Celestion G12H Anniversary Model 8 Ohm

Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:

  • Front-mounted speakers
  • Detachable grill
  • Solid workmanship
  • Speaker mount and quality check carried out in Germany

Speciafications:

  • Speaker diameter: 12" / 305 mm
  • Speaker type: Celestion G12H Anniversary
  • Speaker impedance: 8 ohms
  • Mono mode: yes
  • Stereo mode: no
  • Power output (max.): 30 W
  • Type of speaker installation: Front-loaded
  • Front grill removable: yes
  • Back: closed
  • Acoustic insulation (inside): no
  • Front grille material: cloth
  • Cabinet material: Plywood MDF baffle
  • Width: 580 mm
  • Depth: 290 mm
  • Height: 450 mm
Item no.: ADHPCAB112G12A

Palmer MI CAB 112 V30 - Guitar Cabinet 1 x 12" with Celestion Vintage 30 8 Ohms

Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:

  • Front-mounted speakers
  • Detachable grill
  • Solid workmanship
  • Speaker mount and quality check carried out in Germany
  • Cabinet impedance (mono): 8 ohms
  • Power Rating (mono): 60 W
  • Cabinet weight without speakers: 12 kg
  • Back:   Open
  • Dimensions (W x D x H): 58 x 29 x 45 cm
  • Front Grill: detachable
  • Speaker Mounting: 1x12" front mounted

Vintage 30

Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly "hot-rodded" amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our â??Hâ?? magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.

Specifications
  • Nominal diameter: 12", 305 mm
  • Power Rating: 60 W
  • Nominal impedance: 8 ohms
  • Sensitivity: 100 dB
  • Chassis type: Pressed steel
  • Voice coil diameter: 1,75", 44,5 mm
  • Voice coil material: Round copper
  • Magnet type: Ceramic
  • Magnet weight: 50 oz, 1,42 kg
  • Frequency range: 70 - 5000 Hz
  • Resonance frequency, Fs: 75 Hz
  • DC resistance, Re: 7,3 ohms

Item no.: ADHPCAB112V30

Palmer MI CAB 212 B - 2 x 12 Empty Guitar Cabinet Open Back

Palmer Cabinets are rugged, flexible and affordable guitar cabinets.

  • Front-loadable
  • Solid workmanship
  • Includes:
    • Connection plate with labelling fields
    • Connecting cable
    • Fastening screws
  • Number of speaker openings: 2
  • For speaker diameter: 12"
  • Connectors on connector plate: 2 x input mono/stereo
  • Connector type: 6.3 mm jack
  • Type of speaker installation: Front-loaded
  • Front grill removable: Yes
  • Back: Open
  • Acoustic installation (inside): No
  • Front grill material: cloth
  • Cabinet material: particle board
  • Cabinet covering: Imitation leather
  • Baffle material: MDF
  • Width: 710 mm
  • Height: 480 mm
  • Depth: 295 mm
Item no.: ADHPCAB212B

Palmer MI CAB 212 BAG - Protective Cover for Palmer 2 x12" Cabinets

Protective Cover for Palmer 2 x12" Cabinets

  • Product type: Bag
  • Colour: black
  • Material: Nylon
  • Dimensions: 710 mm x 450 mm x 295 mm
Item no.: ADHPCAB212BAG
Contact person