Telefon: +49 34671 550240 | eMail:
M-Audio BX10

Item number: MA102987

Category: M-Audio

339,00 €

including 19% VAT., no shipping costs (Paketversand)

Not available now!

Notify me, when available



- 10? long-excursion low-frequency driver with oversized magnet
- 240-watt Class A/B amplifier with all-discrete transistor design
- Stereo inputs: XLR; 1/4" balanced/unbalanced; RCA
- Stereo satellite outputs: XLR; 1/4" balanced/unbalanced
- Internal crossover offers variable frequency
- Included subwoofer bypass footswitch
- High-density bass reflex cabinet with internal bracing
- Removable grill and detachable feet
- 180 phase reverse switch
- Type: Bass-reflex active powered subwoofer
- Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround
- Frequency Response: 20-200Hz (-3dB)
- Crossover: HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment
- Input Sensitivity: 80mV pink noise input produces 100dBA output SPL at one meter with vol
- Adjustable Gain: (-30dB to +6dB)
- Amplifier: 240 watts average power into 4, discrete transistor design
- Signal-To-Noise Ratio: 96dB (A-weighted)
- THD at Rated Power, Mono Mode: 0.019%
- Inputs: Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA
- Outputs: Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites
- Controls: Volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack
- Input Impedance: 20k ohms balanced, 10k ohms unbalanced
- Maximum Input Level: +20dBU
- Protection: Over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection
- Indicator: Power on (blue) or standby/bypass (red)
- Power Requirements: Dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable
- Cabinet: Vinyl-laminated high-density internally braced 3/4? MDF cabinet with 1? front and back baffles
- Dimensions: 15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8 cm (d)
- Shipping Weight: 54.6 lbs.; 24.75 kg

 The BX Subwoofer delivers deep, accurate bass response down to the lowest audible frequencies, picking up where your left/right studio monitors leave off. Recording professionals know that hearing the extreme low frequencies in music is essential for making accurate mixing adjustments and producing the best recordings. The BX Subwoofer easily fulfills this requirement in a powerful and compact package that won?t take up too much of your valuable studio space.

The BX Subwoofer?s frequency response extends down to 20Hz (-3 dB), the lowest audible frequency. It uses the highest-quality components for no-compromise performance: a 10? fiberglass/paper composite driver with an oversized magnet and high-temperature 2? voice coil, powered by a 240-watt Class AB all-discrete internal amplifier with a variable 50-200 Hz crossover. The cabinet is constructed of resonant-free ¾? Medium Density Fiberboard (MDF) with 1? front and rear baffles, and is heavily braced to eliminate the extraneous cabinet vibrations that can rob a subwoofer of its impact and articulation.

However, pure acoustic performance is not the only thing that?s important to you. Therefore, we?ve focused on making the BX Subwoofer as easy to connect and convenient to use as possible.

To give it the connection and use flexibility needed to accommodate any system configuration, the BX Subwoofer has a full complement of inputs, outputs and controls.

Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA inputs

Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites

- Volume/gain control
- Phase inverse switch for a seamless system frequency response, regardless of the subwoofer?s location in the studio
- Variable 50-200 Hz crossover control to blend perfectly with L/R monitors of all sizes
- Subwoofer bypass footswitch

You?ll find the footswitch particularly useful when you want an instantaneous comparison of how your mix sounds with and without a dedicated subwoofer.
Engineered Especially for M-Audio Monitors

Designed for use with the M-Audio M3, BX Carbon and BX D2 series, the BX Subwoofer delivers the deep bass response necessary to optimize your music, film and multimedia projects. Most of today?s personal audio systems can easily reproduce very low bass frequencies, so it?s critical that your audio production environment allows you to monitor and adjust those frequencies while you?re mixing.

The BX Subwoofer empowers you to do just that. When paired with any M-Audio studio monitor, the BX Subwoofer becomes an indispensible part of a high-performance monitoring system that provides accurate sound over the entire 20-20 kHz audible spectrum. Although we designed the BX Subwoofer with our superlative M-Audio monitors in mind, the BX sub will enhance the low-frequency performance of any brand of high-quality near-field monitor.
Don?t Strain Your Speakers?Or Your Ears

Studio monitors like our BX5 Carbon are designed to work well as full-range monitors. Yet when they are asked to reproduce extremely bass-heavy material at high volumes, it can be taxing on the speakers and fatiguing to the listener. When they?re used in tandem with the BX Subwoofer however, the system comfortably reproduces full-range signals at significantly higher levels without any audible stress.

This is because the active HP/LP crossover in the BX Subwoofer acts as a ?traffic cop,? directing low frequencies to the subwoofer and only letting those frequencies above the user-chosen crossover point to go to the satellite monitors. When the satellites are relieved of the burden of trying to reproduce the deep bass with their modest 5? woofers, they can play at much louder levels with markedly lower strain and distortion. The entire system now plays cleaner, louder, and with greater detail, which means you?ll get cleaner audio information and make better mixing decisions.

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: