Items from Palmer Pro

Palmer Pro MCT DMX - 3-pin and 5-pin DMX and XLR cable tester

  • Testet 3- und 5-polige DMX-Kabel auf Durchgang
  • Auch zum Test 3-poliger XLR-Mikrofonkabel geeignet
  • Automatischer Test oder manuelle Pol-Auswahl
  • LED-Anzeige
Item no.: ADHAHMCTDMX

Palmer Pro PAN 04 A - Active 2-Channel DI Box

  • Aktive 2-Kanal DI-Box mit hochwertigen Symmetrierübertragern
  • 10 Hz - 40 kHz Frequenzgang, hohe Dynamik
  • -30 dB Eingangsdämpfung schaltbar
  • Ground-Lift-Schalter für jeden Ausgang
Item no.: ADHPAN04A

Palmer Pro PAN 02 - DI Box active

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.

Specifications

  • No. of channels: 1
  • Passive/Actibe: Active
  • Transformer balanced: Yes
  • Attenuator: -30 dB
  • Power Supply: 9V / 48V
  • Input/Output Gain: -4 dB
  • Ground lift switch: Yes
  • Max Input Level: +45 dBu
  • Max Output Level: +10 dBu
  • Frequency Range @ 2K Source Imp. -1dB: 10 Hz - 20 kHz
  • Input Impedance @ 60Hz: 1 MΩ
  • Nom. Output Impedance: 600 Ω
  • Housing: Steel
  • Dimension: 110 x 73 x 42 mm
Item no.: ADHPAN02

Palmer Pro PRMMS - Microphone Splitbox 4 Channel

Passive splitter box for microphone signals. One module has 4 channels. Each channel has an input, an output wired in parallel for passthrough of phantom power, and two splitter transformer-isolated outputs. All outputs are also decoupled via resistors.

  • Each channel: Input: female XLR type
  • Outputs: 1 parallel male XLR type, 2 transformer isolated male XLR type
  • Nominal impedance for inputs/outputs: 200
  • Max. input level: + 6 dBu

PRM-MS
A Microphone Splitter, 4 channel passive in a 19" rackmount steel casing. Each channel comprises an input, an output wired in parallel, and two transformer isolated outputs designed with decoupling resistors to minimize interference between adjacent channels. 

Specifications:

  • Each channel: Input: female XLR type
  • Outputs: 1 parallel male XLR type, 2 transformer isolated male XLR type
  • Nominal impedance for inputs/outputs: 200
  • Max. input level: +6dBu
Item no.: ADHPRMMS

Palmer Pro AHMCT 8 - Cable Tester

A stage is only as good as its cables â?? and the AHMCT 8 sets the record straight.

The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers â?? both in the workshop and on stage.

The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands.

The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations.

  • Solid metal housing
  • Powered by a 9-V block battery
  • Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
  • Additional continuity tester with measuring probes
  • Optical display and buzzer
Item no.: ADHAHMCT8

Palmer Pro DI-REVERSE - Reversed DI Box

Reverse DI Box

Users frequently attempt to connect a DI box in reverse in order to feed a balanced signal into an unbalanced input. Because of mismatching, however, this leads to unsatisfactory results. With the PDIR01 (DI-REVERSE), we offer a box that provides a perfect technical solution to the problem without using adapters.

  • Type: passive
  • Number of channels: 1
  • Number of inputs: 1
  • Input connections: XLR/f
  • Max. input level: +6dBu
  • Input impedance: 2 kohms
  • Number of outputs: 1
  • Output connections: 6.3 mm jack
  • Max. output level: +6dB
  • Output impedance: 2 kohms
  • Frequency range: 20Hz - 20kHz
  • Transformer balanced: yes
  • Transformation ratio: 1:1
  • Controls: Ground lift
  • Housing material: Sheet steel
  • Housing surface: powder-coated
  • Width: 110 mm
  • Depth: 35 mm
  • Height: 39 mm
Item no.: ADHPDIR01

Palmer Pro MONICON - Passive Monitor Controller

Palmer Monicon, and the volume is right!

With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.

The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.

  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm
Item no.: ADHPMONICON

Palmer Pro MONICON L - Passive Monitor Controller

  • Passiver Lautstärkeregler
  • Stereo- und AUX-Eingänge
  • Zwei Ausgänge
  • Monosummen-Ausgang
Item no.: ADHPMONICONL

Palmer Pro MONICON W - Passive Monitor Controller white Limited Edition

Item no.: ADHPMONICONW

Palmer Pro PAN 01 - DI Box passive

Standard passive DI box for line and loudspeaker levels.

Jack input with parallel "THRU" output, transformer balanced XLR output. Attenuable input sensivity, can handle both line level and speaker level singals.

Features:
  • Trafosymetric XLR Output
  • Input Sensitivity Adjustable
  • Input impedance: 68,000 ohms
  • Output impedance: 600 ohms
  • Transformer ratio: 10 : 1
  • Maximum output: +6 dB
  • Ground lift switch
  • Metal casing 110 x 73 x 42 mm

Specifications

  • No. of channels: 1
  • Passive/Actibe: Passive
  • Transformer balanced: Yes
  • Attenuator: -30 dB
  • Input/Output Gain: -20 dB
  • Ground lift switch: Yes
  • Max Input Level: +54 dBu
  • Max Output Level: +4 dBu
  • Frequency Range @ 2K Source Imp. -1dB: 20 Hz - 20 kHz
  • Input Impedance @ 60Hz: 60 kΩ
  • Nom. Output Impedance: 600 Ω
  • Housing: Steel
  • Dimension: 110 x 73 x 42 mm
Item no.: ADHPAN01

Palmer Pro PAN 01 PRO - Professional DI Box passive

PAN01 PRO is the deluxe version of Palmer's top selling passive DI box PAN01. It features a 2 mm steel housing and heavy duty metal switches for the PAD and ground lift functions to withstand the rigors of the road and stage. The transformer has been completely redesigned and upscaled with a larger magnet core for increased dynamic range and headroom, and a metal cover for improved shielding. Also, the PAN01 PRO's parallel out is now switchable to double as additional input. This feature enables the summing of a stereo output (e.g. of a keyboard) with the resulting mono signal present at the PAN01 PRO's balanced XLR output.

The PAN01 PRO comes with a high quality reinforced nylon bag with cutouts for connecting the box inside the bag.

Item no.: ADHPAN01PRO

Palmer Pro PAN 03 - 19" DI Box 4-channel active

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.

Specifications

  • No. of channels: 4
  • Passive/Actibe: Active
  • Transformer balanced: Yes
  • Attenuator: -30 dB
  • Power Supply: AC Mains
  • Input/Output Gain: -4 dB
  • Ground lift switch: Yes
  • Max Input Level: +45 dBu
  • Max Output Level: +10 dBu
  • Frequency Range @ 2K Source Imp. -1dB: 10 Hz - 20 kHz
  • Input Impedance @ 60Hz: 1 MΩ
  • Nom. Output Impedance: 600 Ω
  • Housing: Steel
  • Dimension: 19" x 1 U x 90 mm
Item no.: ADHPAN03

Palmer Pro PAN 03 PASS - 19" DI Box 4-channel passive

Passive 4-channel DI BOX in a 19" housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30dB) permits connection of a line or speaker signal at the user's choice. The specifications are identical with those of the PAN 01. All connections and switches are on the 1 U front panel; the XLR output is additionally present as a parallel socket on the rear panel. 19"/1 U housing, 90 mm deep.

Features:
  • Trafosymetric XLR Output
  • Input Sensitivity Adjustable
  • Input Impedance: 68,000 ohms
  • Output Impedance: 600 ohms
  • Transformer Ratio: 10 : 1
  • Maximum Output: +6 dB
  • Ground lift switch
  • 19"/1 U Housing, 90 mm deep
Item no.: ADHPAN03PASS

Palmer Pro PAN 05 - Microphone Merger

With the PAN05, two microphone signals can be mixed down to one. Since decoupling occurs via the balanced resistor network, the PAN05 also lets phantom power "pass through", useful for condenser microphones. However, due to the difference in sound and signal level, mixing dynamic and condenser mics should be avoided. Best results will be achieved using two identical mics.

SPECIFICATIONS:

  • Input: 2 x XLR/f balanced
  • Nominal impedance: 200 Ω
  • Output 1 x XLR/m balanced
  • Load impedance >200 Ω
  • Symmetrically decoupled through resistors
  • Total ohmic value: 200 ohms
  • Typical attenuation: 6 dB
  • Housing: metal casing 110 x 73 x 42 mm
Item no.: ADHPAN05

Palmer Pro PAN 08 - 19" DI/Line Isolation Box 4 channels active

The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced XLR jacks (front and rear).

The signal level can be attenuated by 20 dB for microphone inputs, but can also be boosted in three stages by up to 18 dB for LINE inputs if necessary. With an output level of +12 dBu on a load of 600 â?¦ with 0.05 % THD / 40 Hz and an output noise level of less than -110 dBu, the unit meets even high professional standards. One special feature that is worthy of mention is battery power. The supply voltage may range from 9 to 18 V. Thus the PAN08 can also be used without mains power outdoors.

Item no.: ADHPAN08
Contact person