High quality fog juice with CO2 Boost effect.
The RGB 3C IR is a basic 3-channel RGB LED controller. It was designed to control any standard 3 channel RGB fixture where channel 1 is Red, channel 2 is Green and channel 3 is Blue. All LED fixtures must be set to run in DMX mode and be addressed to DMX channel 1. The units control panel includes nine direct access ?Static Color? buttons, which contain pre-programmed color presets, 3 manual RGB faders so a desired color could be set on the fly, a Program select button which allows for 7 static colors and 10 chase programs to be accessed via the program select fader, a Sound Active button which activates the 10 chase programs to randomly sequence via an internal microphone, an Auto run button also activates the 10 chase programs to randomly sequence while the speed of the chases can be controlled via the Speed fader. The Hold button will lock all buttons and faders and pause the current scene. The controller will remain locked even when power is switched off and on, and finally a Blackout button to bring all values to zero so there is no output going to your fixtures. It?s the ideal control solution for D.J.?s, small night Clubs, and bars that want a simple LED controller to run the show.
This fogger produces 21000 cubic feet of fog per minute, has an external tank with a 5 Liter capacity, and has an 8 minute warm-up time. This machine uses water-based fog fluid only.
- Black Out: Turns fixture On/Off- Auto Run: Automatically run through built-in programs- Program Selection Access units built-in programs- Flash: Strobe effect- Speed: Control speed of Auto Run- Sound Active: Activates sound active mode- RGB Buttons: Adjust RGB colors with the "*" and "-" buttons- + and - Buttons: Adjust flash rate, speed of the Auto Run and Program Selection
This intelligent scanner has two operational modes (DMX-512, Master/Slave and Sound Active), has a Pan/Tilt Inversion Mode and only draws 103-Watts of power.It offers other useful professional features such as: 4-button DMX Menu, 1.8 degree stepper motors, ADJ UC3 easy-to-use controller compatibility and Stepper motors for smooth movement.
The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, built-in shows and colors macros, a 4-button DMX LCD display, PowerCon AC In/Out, 5 selectable Dim Curves for stage lighting, 4 Pixel Flipping options, and 5 DMX channel modes. Dotz Matrix may run in its stand-alone mode from built-in programs, sound actively, or from a DMX Controller.
The Dotz TPar System is a exciting all-in-one LED Wash system for mobile entertainers bands and stage lighting. This lighting system features a 4-head T-Bar light system each with one 30-Watt COB TRI LED (RGB), producing wide, saturated color washes of light with LEDs rated at an extremely long life of 50,000 hours. The system washes a very large area with its 90-degree beam angle. Or change the light output to a 25-degree beam with the included lens kit.Great for any performer on-the-go, the Dotz TPar System is easy to set-up and take down. Plus, with low heat emitting LEDs performers stay cooler on stage. The system includes a tripod stand, a foot controller, RF remote control and a gig bags to help protect your equipment.In addition to it?s built-in programs and the wired foot controller , the Dotz TPar System may also be controlled by an external DMX Controller via it?s XLR In/Outs. User can also mount two smaller lighting fixtures on top of the T-bar and plug them in directly on the back of the bar.System includes:- 4x COB LED Par Wash Fixtures- 1x wired Foot Controller - 1x Lighting Stand- 1x RF Remote Control- 1x Stand Bag- 1x Soft case for lighting system
The ECO UV BAR DMX offers users more flexibility and control with built-in DMX-512 protocol (3 DMX channels), a 3-Button DMX display, included IR remote control, AC In/Out power linking from the built-in IEC connectors and three operational modes. This fixture requires very little maintenance because it?s LEDs are rated at 50,000 hours.
This fogger produces 7000 cubic feet of fog per minute, has an external tank with a 2.5 Liter capacity, and has an 8 minute warm-up time. This machine uses water-based fog fluid only.
The ADJ FS600LED is a modern 60W LED Follow Spot. It features a bright 60W LED source, 8 colors, variable strobe speed and dimming capabilities. Additional features include: adjustable Iris, shutters for manual framing and 3-pin and 5-pin DMX protocol. This fixture stays cool and consumes only 60W of power.
The ADJ H2O IR is a multi-colored simulated water flowing effect with a 12W LED source. The unit produces almost no heat, requires very little power (23.8W max) and can be used all night long. The LED is rated at 30,000 hours of use.
The unit comes equipped with two interchangeable lenses (34 and 52-degree) depending on how wide of a beam is required for your event. The H2O IR is compatible with the UC IR wireless controller (sold separately).
There?s no end to applications for the H2O IR. Water flowing effects can add a unique visual dimension to nightclubs, bars, restaurants, shows, music, museums, performances, and even displays and special events. The H2O IR may be used with or without the use of fog.