Telefon: +49 34671 550240 | eMail:

Item number: 41606440

Category: LED Moving Lights

1.349,00 €

including 19% VAT., no shipping costs (Paketversand)

Recommended retail price: 1.660,05 €
(You save 18.74%, that is 311,05 €)
Must be ordered. Ready for shipment in 1 days

Shipping time: 2 - 4 workdays


Power supply:100-240 V AC, 50/60 Hz ~
Power consumption:460 W
Protocol:Art-Net 3
Signal port:2 x RJ45 (EtherCon)
DMX control channels:11/13/58
DMX512 connection:5-pin and 3-pin XLR
Flash-rate:20 Hz
Sound-control:via built-in microphone
Wireless signal transmission:2.4 GHz (ISM)
Number of LEDs:16
LED type:Array Cluster 30 W, RGB
Maximum PAN-movement:630°
Maximum TILT-movement:270°
Dimensions (WxDxH):467 x 284 x 612 mm
Beam angle:15°
Weight:17.5 kg
Shipping weight:18.000 kg
Ecodesign regulation:Yes
Special product:Not suitable for household room illumination
Purpose:Show effect lighting

- LED Performance Cluster for pixel mapping applications via Art-Net
- Equipped with 16 x 30 W COB LED in the colors red, green and blue
- Flicker-free projection
- Each LED can be controlled individually
- Quick and easy control via Art-Net
- For use via appropriate lighting control software supporting Art-Net
- With integrated wireless receiver for WDMX operation (Wireless Solution - made in Sweden)
- 11, 13 or 58 DMX channels selectable
- Supports RDM (Remote Device Management)
- Functions: RGB color mixture, automatic color change, built-in programs and strobe effect with variable speed, dimmer, sound-control, Master/Slave operation
- Sound-control via built-in microphone; sensitivity adjustable
- Automatic position correction
- Exact positioning via 16 bit PAN/TILT movement resolution
- PAN angle switchable between 540° and 630°
- DMX-controlled operation or stand-alone operation with Master/Slave function
- ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts etc.
- Control board with LC display and foil-keyboard for adjusting the DMX-starting address, PAN/TILT reverse, reset
- The scenes can be modified via the Control Board or via an external controller and loaded into the memory
- Number of scenes can be changed individually
- Integrated web interface for firmware updates through a browser
- EtherCon input and output
- Switch-mode power supply for operation between 100 and 240 Volts
- Power connection via Neutrik PowerCon jack and included power cable
- Feed-through output allows to power up to 8 devices
- DMX control via every standard DMX controller

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Product Tags

Please login first to add a tag.