Max. carrying capacity/complete system: 25 kg
Minimum height: 1.7 m
Maximum height: 2.8 m
Maximum elevation: 1.1 m
Weight/ Trusssystem: 15.5 kg
The LED Commander is a truly versatile LED Controller which can control nearly every LED Parcan on the market. It can control up to 8 different group of fixtures simultaneously.
In order to control each function it has 8 faders. Each fader can be patched to the desired function. Furthermore the unit has 16 scenes (8 scenes on 2 pages) and 16 chases (8 chases on 2 pages). Moreover, it is equipped with 2 Auxiliary channels to connect your fogger or strobe. In order to make programming easy and simple the LED Commander is equipped with a bright and clear LCD display.
Display: 2x 16 Character LCD
DMX connector: XLR 3 Pole
Midi connector: 5p DIN (IN/OUT/THRU)
USB connector: 5V (light device)
Audio input: RCA 100mV ? 1Vpp
DMX channels: 8 x 16 & 2 aux, 130 total
Max steps in chase: 1750
Max total steps: 1750
Dimensions: 482x 156 x 75mm (LxWxH)
19" rackmountable: Yes
Power comsumption: 20Watt
DC input: 9-12V 800mA
Power supply: AC-12V (included)
The Showtec LED Par 56 Short is a Par 56 with RGB colourmixing. Due to the use of LED's, the lifetime is extremely long and the power consumption is very low. The Showtec LED Par 56 contains 153 LED's (51 x red, 51 x green and 51 x blue). It can be controlled by 6 DMX channels (RGB and pre-programmed chases and colours) automatically by its built-in processor or music-controlled by its internal microphone.
Duty cycle: Colormixing 8 hours / Full on: 2 hours. Not abled for continious use!
The DJ LED Scanner is a stylish Scanner with 40 pieces of high power LED's. This unit has a high light output and is very easy to use, the light weight and low power consumption enables to set up this unit in every venue. All functions are controllable by each DMX-512 controller and the Scanner works stand-alone.
Power Input: 230V 50/60 Hz
Power Consumption: 23W
Light Source: 40 High-Power LEDs (RGB)
Control: Auto, Master/Slave, DMX
DMX Channels: 5
Control Display: 4 Digits LED
Power Connector: IEC
Data Connector: In/Out (XLR 3 Pin)
Dimensions: 380 x 190 x 255mm
1x Alu Showstand
2x LED Scanner
4x LED Lights
1x 20m DMX Cable
5x 1,5m DMX Cable
Average product review
Notify me, when available
Complete Stand with Truss, Scanners, Lights, Controller, Clamps and Cables
- Quickly mounted - it's really easy
- Including 3 m cross section
- Ideal for mobile discos, individual entertainers, ...
- Extendable with additional cross sections
- Max. carrying capacity of the system 25 kg