Audio Tools


Dap Audio ADI-200 - Active direct box

  • Roadproof housing with rubber feet
  • Low distortion
  • Ground lift
  • 20dB Attenuation switch
Item no.: D1943

Dap Audio Cable Tester Pro -

  • Must have for every roady
  • 9V Battery operated
  • Speakon 4P, Speakon 8P, RJ45, RCA
  • XLR 3P, XLR 5P, 5P Din, 6,3 Jack, 3,5 Jack
Item no.: D1909

Palmer Pro PAN 02 - DI Box active

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.

Specifications

  • No. of channels: 1
  • Passive/Actibe: Active
  • Transformer balanced: Yes
  • Attenuator: -30 dB
  • Power Supply: 9V / 48V
  • Input/Output Gain: -4 dB
  • Ground lift switch: Yes
  • Max Input Level: +45 dBu
  • Max Output Level: +10 dBu
  • Frequency Range @ 2K Source Imp. -1dB: 10 Hz - 20 kHz
  • Input Impedance @ 60Hz: 1 MΩ
  • Nom. Output Impedance: 600 Ω
  • Housing: Steel
  • Dimension: 110 x 73 x 42 mm
Item no.: ADHPAN02

Dap Audio Digital Sound Level Meter -

LCD Digital-Display
? Analog Bar Anzeige
? Breite Dynamik
? Auto/Manual Bereich
? Schnelle/Langsame Response wählbar
? Max. Wert Hold-Funktion
? A/C-Weighting Auswahl
? Datum und Zeit Display
? AC/DC Auxilitary-Output
? Hintergrundbeleuchtetes Display
? Low-Power Anzeige
Item no.: 91004

Dap Audio FLA01 - Jack M. (50 kilo-Ohm) > XLR F. (600 Ohm) - With impedance-matching and on/off switch

  • With impedance-matching and on/off switch
Item no.: FLA01

Dap Audio FLA02 - Jack M. (50 kilo-Ohm) > XLR M. (600 Ohm) - With impedance-matching and on/off switch

  • With impedance-matching and on/off switch
Item no.: FLA02

Dap Audio FLA03 - Jack F. (50 kilo-Ohm) > XLR F. (600 Ohm) - With impedance-matching and on/off switch

  • With impedance-matching and on/off switch
Item no.: FLA03

Dap Audio FLA04 - Jack F. (50 kilo-Ohm) > XLR M. (600 Ohm) - With impedance-matching

  • With impedance-matching
Item no.: FLA04

Dap Audio XLR Female to XLR Male - (insulated)

  • (insulated)
Item no.: FLA09

LD Systems PHA - Phantom Power Adapter 48 V

Phantom Power Adapter 48V

Mini XLR Male 3 pins > XLR male

Item no.: ADHLDPHA

Palmer Pro AHMCT 8 - Cable Tester

A stage is only as good as its cables â?? and the AHMCT 8 sets the record straight.

The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers â?? both in the workshop and on stage.

The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands.

The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations.

  • Solid metal housing
  • Powered by a 9-V block battery
  • Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
  • Additional continuity tester with measuring probes
  • Optical display and buzzer
Item no.: ADHAHMCT8

Palmer Pro PAN 01 - DI Box passive

Standard passive DI box for line and loudspeaker levels.

Jack input with parallel "THRU" output, transformer balanced XLR output. Attenuable input sensivity, can handle both line level and speaker level singals.

Features:
  • Trafosymetric XLR Output
  • Input Sensitivity Adjustable
  • Input impedance: 68,000 ohms
  • Output impedance: 600 ohms
  • Transformer ratio: 10 : 1
  • Maximum output: +6 dB
  • Ground lift switch
  • Metal casing 110 x 73 x 42 mm

Specifications

  • No. of channels: 1
  • Passive/Actibe: Passive
  • Transformer balanced: Yes
  • Attenuator: -30 dB
  • Input/Output Gain: -20 dB
  • Ground lift switch: Yes
  • Max Input Level: +54 dBu
  • Max Output Level: +4 dBu
  • Frequency Range @ 2K Source Imp. -1dB: 20 Hz - 20 kHz
  • Input Impedance @ 60Hz: 60 kΩ
  • Nom. Output Impedance: 600 Ω
  • Housing: Steel
  • Dimension: 110 x 73 x 42 mm
Item no.: ADHPAN01

Palmer Pro PAN 01 PRO - Professional DI Box passive

PAN01 PRO is the deluxe version of Palmer's top selling passive DI box PAN01. It features a 2 mm steel housing and heavy duty metal switches for the PAD and ground lift functions to withstand the rigors of the road and stage. The transformer has been completely redesigned and upscaled with a larger magnet core for increased dynamic range and headroom, and a metal cover for improved shielding. Also, the PAN01 PRO's parallel out is now switchable to double as additional input. This feature enables the summing of a stereo output (e.g. of a keyboard) with the resulting mono signal present at the PAN01 PRO's balanced XLR output.

The PAN01 PRO comes with a high quality reinforced nylon bag with cutouts for connecting the box inside the bag.

Item no.: ADHPAN01PRO

Showtec SC-5

MiniMix Mic/Line mixer
Item no.: D1505

Showtec SC-19

Speaker Checker
Item no.: D1519
Contact person

Audio Tools


An event can only be running smoothly if all of the cables are working properly. If, at any point, one might be suspecting a faulty cable, simply use our cable testers. With them you will quickly get to the root of the problem.

The same goes for speakers; they should be tested before every event. Our speaker checkers by Showtec are sure to be up to the task.

We also offer the solution to many other problems. With a DI unit you can connect devices with high impedance, unbalanced signals (instruments) to devices with low impedance, balanced signals (mixers). This minimises the probability of encountering interferences.

So have a look at our range of audio tools!